使用ncn5120模块-在hassio中快速配置

1. 硬件连接

参考前面两个视频的内容，使用usb或者wifi连接方式都可以

1. 增加add-on仓库

https://github.com/da-anda/hass-io-addons

https://github.com/zhujisheng/hass-io-addons

1. 配置

   address: 0.0.1
   client_address: '0.0.2:10'
   interface: tpuart
   device: /dev/ttyACM0
   usb_filters: ''
   custom_config: |-
     [main]
     addr = 0.0.1
     client-addrs = 0.0.2:10
     connections = server,A.tcp,interface
     logfile = /dev/stdout
   
     [A.tcp]
     server = knxd_tcp
   
     [server]
     server = ets_router
     tunnel = tunnel
     router = router
     discover = true
     name = knxd
   
     [interface]
     driver = ncn5120
     ip-address = 192.168.1.3
     dest-port = 5120
     #device = /dev/ttyUSB0
     #baudrate = 19200
   

2. 在HomeAssistant中配置KNX设备

   knx:
     tunneling:
       host: '127.0.0.1'
       port: 3671
       local_ip: '127.0.0.1'
     event_filter:
       - "*/*/*"
     light:
       - name: 卧室射灯
         address: '1/6/9'
         state_address: '1/6/9'
       - name: 客厅灯带
         address: '1/5/233'
         state_address: '1/5/233'
   

返回课程目录↩